Inheritance diagram for lsst.ip.isr.defects.Defects:

Public Member Functions
	__init__ (self, defectList=None, metadata=None, , normalize_on_init=True, *kwargs)

	__len__ (self)

	__getitem__ (self, index)

	__setitem__ (self, index, value)

	__iter__ (self)

	__delitem__ (self, index)

	__eq__ (self, other)

	__str__ (self)

	bulk_update (self)

	append (self, value)

	insert (self, index, value)

	copy (self)

	transpose (self)

	maskPixels (self, mask, maskName="BAD")

	updateCounters (self, columns=None, hot=None, cold=None)

	toFitsRegionTable (self)

	fromDict (cls, dictionary)

	toDict (self)

	toTable (self)

	fromTable (cls, tableList, normalize_on_init=True)

	readLsstDefectsFile (cls, filename, normalize_on_init=False)

	fromFootprintList (cls, fpList)

	fromMask (cls, mask, maskName)

	requiredAttributes (self)

	requiredAttributes (self, value)

	metadata (self)

	getMetadata (self)

	setMetadata (self, metadata)

	updateMetadata (self, camera=None, detector=None, filterName=None, setCalibId=False, setCalibInfo=False, setDate=False, **kwargs)

	updateMetadataFromExposures (self, exposures)

	calibInfoFromDict (self, dictionary)

	determineCalibClass (cls, metadata, message)

	readText (cls, filename, **kwargs)

	writeText (self, filename, format="auto")

	readFits (cls, filename, **kwargs)

	writeFits (self, filename)

	fromDetector (self, detector)

	validate (self, other=None)

	apply (self, target)

Public Attributes
	requiredAttributes = set(["_OBSTYPE", "_SCHEMA", "_VERSION"])

	log = log if log else logging.getLogger(__name__)

Protected Member Functions
	_check_value (self, value)

	_normalize (self)

Static Protected Member Functions
	_get_values (values, n=1)

Protected Attributes
list	_defects = []

bool	_bulk_update = True

	_instrument = None

	_raftName = None

	_slotName = None

	_detectorName = None

	_detectorSerial = None

	_detectorId = None

	_filter = None

str	_calibId = None

	_seqfile = None

	_seqname = None

	_seqcksum = None

	_metadata = PropertyList()

	_requiredAttributes

Static Protected Attributes
str	_OBSTYPE = "generic"

str	_SCHEMA = "NO SCHEMA"

int	_VERSION = 0

Detailed Description

Calibration handler for collections of `lsst.meas.algorithms.Defect`.

Parameters
----------
defectList : iterable, optional
    Collections of defects to apply to the image. Can be an iterable of
    `lsst.meas.algorithms.Defect` or `lsst.geom.BoxI`.
metadata : `lsst.daf.base.PropertyList`, optional
    Metadata to associate with the defects.  Will be copied and
    overwrite existing metadata, if any. If not supplied the existing
    metadata will be reset.
normalize_on_init : `bool`
    If True, normalization is applied to the defects in ``defectList`` to
    remove duplicates, eliminate overlaps, etc.

Notes
-----
Defects are stored within this collection in a "reduced" or "normalized"
form: rather than simply storing the bounding boxes which are added to the
collection, we eliminate overlaps and duplicates. This normalization
procedure may introduce overhead when adding many new defects; it may be
temporarily disabled using the `Defects.bulk_update` context manager if
necessary.

The attributes stored in this calibration are:

_defects : `list` [`lsst.meas.algorithms.Defect`]
    The collection of Defect objects.

The calibration type used for ingest.

Definition at line 47 of file defects.py.

Constructor & Destructor Documentation

◆ init()

lsst.ip.isr.defects.Defects.__init__	(		self,
			defectList = None,
			metadata = None,
		*	,
			normalize_on_init = True,
		**	kwargs )

Definition at line 83 of file defects.py.

Member Function Documentation

◆ delitem()

lsst.ip.isr.defects.Defects.__delitem__	(		self,
			index )

Definition at line 145 of file defects.py.

◆ eq()

lsst.ip.isr.defects.Defects.__eq__	(		self,
			other )

Compare if two `Defects` are equal.

Two `Defects` are equal if their bounding boxes are equal and in
the same order.  Metadata content is ignored.

Definition at line 148 of file defects.py.

◆ getitem()

lsst.ip.isr.defects.Defects.__getitem__	(		self,
			index )

Definition at line 133 of file defects.py.

◆ iter()

lsst.ip.isr.defects.Defects.__iter__ ( self )

Definition at line 142 of file defects.py.

◆ len()

lsst.ip.isr.defects.Defects.__len__ ( self )

Definition at line 130 of file defects.py.

◆ setitem()

lsst.ip.isr.defects.Defects.__setitem__	(	self,
		index,
		value )

Can be given a `~lsst.meas.algorithms.Defect` or a `lsst.geom.BoxI`

Definition at line 136 of file defects.py.

◆ str()

lsst.ip.isr.defects.Defects.__str__ ( self )

Definition at line 170 of file defects.py.

◆ _check_value()

lsst.ip.isr.defects.Defects._check_value	(		self,
			value )

protected

Check that the supplied value is a `~lsst.meas.algorithms.Defect`
or can be converted to one.

Parameters
----------
value : `object`
    Value to check.

Returns
-------
new : `~lsst.meas.algorithms.Defect`
    Either the supplied value or a new object derived from it.

Raises
------
ValueError
    Raised if the supplied value can not be converted to
    `~lsst.meas.algorithms.Defect`

Definition at line 98 of file defects.py.

◆ _get_values()

lsst.ip.isr.defects.Defects._get_values	(		values,
			n = 1 )

staticprotected

Retrieve N values from the supplied values.

Parameters
----------
values : `numbers.Number` or `list` or `np.array`
    Input values.
n : `int`
    Number of values to retrieve.

Returns
-------
vals : `list` or `np.array` or `numbers.Number`
    Single value from supplied list if ``n`` is 1, or `list`
    containing first ``n`` values from supplied values.

Notes
-----
Some supplied tables have vectors in some columns that can also
be scalars.  This method can be used to get the first number as
a scalar or the first N items from a vector as a vector.

Definition at line 486 of file defects.py.

◆ _normalize()

lsst.ip.isr.defects.Defects._normalize ( self )

protected

Recalculate defect bounding boxes for efficiency.

Notes
-----
Ideally, this would generate the provably-minimal set of bounding
boxes necessary to represent the defects. At present, however, that
doesn't happen: see DM-24781. In the cases of substantial overlaps or
duplication, though, this will produce a much reduced set.

Definition at line 174 of file defects.py.

◆ append()

lsst.ip.isr.defects.Defects.append	(		self,
			value )

Definition at line 219 of file defects.py.

◆ apply()

lsst.ip.isr.calibType.IsrCalib.apply	(		self,
			target )

inherited

Method to apply the calibration to the target object.

Parameters
----------
target : `object`
    Thing to validate against.

Returns
-------
valid : `bool`
    Returns true if the calibration was applied correctly.

Raises
------
NotImplementedError
    Raised if not implemented.

Definition at line 706 of file calibType.py.

◆ bulk_update()

lsst.ip.isr.defects.Defects.bulk_update ( self )

Temporarily suspend normalization of the defect list.

Definition at line 209 of file defects.py.

◆ calibInfoFromDict()

lsst.ip.isr.calibType.IsrCalib.calibInfoFromDict	(		self,
			dictionary )

inherited

Handle common keywords.

This isn't an ideal solution, but until all calibrations
expect to find everything in the metadata, they still need to
search through dictionaries.

Parameters
----------
dictionary : `dict` or `lsst.daf.base.PropertyList`
    Source for the common keywords.

Raises
------
RuntimeError
    Raised if the dictionary does not match the expected OBSTYPE.

Definition at line 325 of file calibType.py.

◆ copy()

lsst.ip.isr.defects.Defects.copy ( self )

Copy the defects to a new list, creating new defects from the
bounding boxes.

Returns
-------
new : `Defects`
    New list with new `Defect` entries.

Notes
-----
This is not a shallow copy in that new `Defect` instances are
created from the original bounding boxes.  It's also not a deep
copy since the bounding boxes are not recreated.

Definition at line 227 of file defects.py.

◆ determineCalibClass()

lsst.ip.isr.calibType.IsrCalib.determineCalibClass	(	cls,
		metadata,
		message )

inherited

Attempt to find calibration class in metadata.

Parameters
----------
metadata : `dict` or `lsst.daf.base.PropertyList`
    Metadata possibly containing a calibration class entry.
message : `str`
    Message to include in any errors.

Returns
-------
calibClass : `object`
    The class to use to read the file contents.  Should be an
    `lsst.ip.isr.IsrCalib` subclass.

Raises
------
ValueError
    Raised if the resulting calibClass is the base
    `lsst.ip.isr.IsrClass` (which does not implement the
    content methods).

Definition at line 391 of file calibType.py.

◆ fromDetector()

lsst.ip.isr.calibType.IsrCalib.fromDetector	(		self,
			detector )

inherited

Modify the calibration parameters to match the supplied detector.

Parameters
----------
detector : `lsst.afw.cameraGeom.Detector`
    Detector to use to set parameters from.

Raises
------
NotImplementedError
    Raised if not implemented by a subclass.
    This needs to be implemented by subclasses for each
    calibration type.

Reimplemented in lsst.ip.isr.crosstalk.CrosstalkCalib, lsst.ip.isr.deferredCharge.DeferredChargeCalib, lsst.ip.isr.linearize.Linearizer, and lsst.ip.isr.ptcDataset.PhotonTransferCurveDataset.

Definition at line 588 of file calibType.py.

◆ fromDict()

lsst.ip.isr.defects.Defects.fromDict	(		cls,
			dictionary )

Construct a calibration from a dictionary of properties.

Must be implemented by the specific calibration subclasses.

Parameters
----------
dictionary : `dict`
    Dictionary of properties.

Returns
-------
calib : `lsst.ip.isr.CalibType`
    Constructed calibration.

Raises
------
RuntimeError
    Raised if the supplied dictionary is for a different
    calibration.

Reimplemented from lsst.ip.isr.calibType.IsrCalib.

Definition at line 357 of file defects.py.

◆ fromFootprintList()

lsst.ip.isr.defects.Defects.fromFootprintList	(		cls,
			fpList )

Compute a defect list from a footprint list, optionally growing
the footprints.

Parameters
----------
fpList : `list` of `lsst.afw.detection.Footprint`
    Footprint list to process.

Returns
-------
defects : `Defects`
    List of defects.

Definition at line 666 of file defects.py.

◆ fromMask()

lsst.ip.isr.defects.Defects.fromMask	(	cls,
		mask,
		maskName )

Compute a defect list from a specified mask plane.

Parameters
----------
mask : `lsst.afw.image.Mask` or `lsst.afw.image.MaskedImage`
    Image to process.
maskName : `str` or `list`
    Mask plane name, or list of names to convert.

Returns
-------
defects : `Defects`
    Defect list constructed from masked pixels.

Definition at line 686 of file defects.py.

◆ fromTable()

lsst.ip.isr.defects.Defects.fromTable	(	cls,
		tableList,
		normalize_on_init = True )

Construct a `Defects` from the contents of a
`~lsst.afw.table.BaseCatalog`.

Parameters
----------
table : `lsst.afw.table.BaseCatalog`
    Table with one row per defect.
normalize_on_init : `bool`, optional
    If `True`, normalization is applied to the defects listed in the
    table to remove duplicates, eliminate overlaps, etc. Otherwise
    the defects in the returned object exactly match those in the
    table.

Returns
-------
defects : `Defects`
    A `Defects` list.

Notes
-----
Two table formats are recognized.  The first is the
`FITS regions <https://fits.gsfc.nasa.gov/registry/region.html>`_
definition tabular format written by `toFitsRegionTable` where the
pixel origin is corrected from FITS 1-based to a 0-based origin.
The second is the legacy defects format using columns ``x0``, ``y0``
(bottom left hand pixel of box in 0-based coordinates), ``width``
and ``height``.

The FITS standard regions can only read BOX, POINT, or ROTBOX with
a zero degree rotation.

Reimplemented from lsst.ip.isr.calibType.IsrCalib.

Definition at line 517 of file defects.py.

◆ getMetadata()

lsst.ip.isr.calibType.IsrCalib.getMetadata ( self )

inherited

Retrieve metadata associated with this calibration.

Returns
-------
meta : `lsst.daf.base.PropertyList`
    Metadata. The returned `~lsst.daf.base.PropertyList` can be
    modified by the caller and the changes will be written to
    external files.

Definition at line 174 of file calibType.py.

◆ insert()

lsst.ip.isr.defects.Defects.insert	(	self,
		index,
		value )

Definition at line 223 of file defects.py.

◆ maskPixels()

lsst.ip.isr.defects.Defects.maskPixels	(	self,
		mask,
		maskName = "BAD" )

Set mask plane based on these defects.

Parameters
----------
maskedImage : `lsst.afw.image.MaskedImage` or `lsst.afw.image.Mask`
    Image to process.  Only the mask plane is updated.
maskName : str, optional
    Mask plane name to use.

Definition at line 261 of file defects.py.

◆ metadata()

lsst.ip.isr.calibType.IsrCalib.metadata ( self )

inherited

Definition at line 171 of file calibType.py.

◆ readFits()

lsst.ip.isr.calibType.IsrCalib.readFits	(		cls,
			filename,
		**	kwargs )

inherited

Read calibration data from a FITS file.

Parameters
----------
filename : `str`
    Filename to read data from.
kwargs : `dict` or collections.abc.Mapping`, optional
    Set of key=value pairs to pass to the ``fromTable``
    method.

Returns
-------
calib : `lsst.ip.isr.IsrCalib`
    Calibration contained within the file.

Definition at line 517 of file calibType.py.

◆ readLsstDefectsFile()

lsst.ip.isr.defects.Defects.readLsstDefectsFile	(	cls,
		filename,
		normalize_on_init = False )

Read defects information from a legacy LSST format text file.

Parameters
----------
filename : `str`
    Name of text file containing the defect information.

normalize_on_init : `bool`, optional
    If `True`, normalization is applied to the defects listed in the
    table to remove duplicates, eliminate overlaps, etc. Otherwise
    the defects in the returned object exactly match those in the
    table.

Returns
-------
defects : `Defects`
    The defects.

Notes
-----
These defect text files are used as the human readable definitions
of defects in calibration data definition repositories.  The format
is to use four columns defined as follows:

x0 : `int`
    X coordinate of bottom left corner of box.
y0 : `int`
    Y coordinate of bottom left corner of box.
width : `int`
    X extent of the box.
height : `int`
    Y extent of the box.

Files of this format were used historically to represent defects
in simple text form.  Use `Defects.readText` and `Defects.writeText`
to use the more modern format.

Definition at line 615 of file defects.py.

◆ readText()

lsst.ip.isr.calibType.IsrCalib.readText	(		cls,
			filename,
		**	kwargs )

inherited

Read calibration representation from a yaml/ecsv file.

Parameters
----------
filename : `str`
    Name of the file containing the calibration definition.
kwargs : `dict` or collections.abc.Mapping`, optional
    Set of key=value pairs to pass to the ``fromDict`` or
    ``fromTable`` methods.

Returns
-------
calib : `~lsst.ip.isr.IsrCalibType`
    Calibration class.

Raises
------
RuntimeError
    Raised if the filename does not end in ".ecsv" or ".yaml".

Definition at line 425 of file calibType.py.

◆ requiredAttributes() [1/2]

lsst.ip.isr.calibType.IsrCalib.requiredAttributes ( self )

inherited

Definition at line 162 of file calibType.py.

◆ requiredAttributes() [2/2]

lsst.ip.isr.calibType.IsrCalib.requiredAttributes	(		self,
			value )

inherited

Definition at line 166 of file calibType.py.

◆ setMetadata()

lsst.ip.isr.calibType.IsrCalib.setMetadata	(		self,
			metadata )

inherited

Store a copy of the supplied metadata with this calibration.

Parameters
----------
metadata : `lsst.daf.base.PropertyList`
    Metadata to associate with the calibration.  Will be copied and
    overwrite existing metadata.

Reimplemented in lsst.ip.isr.transmissionCurve.IntermediateTransmissionCurve.

Definition at line 186 of file calibType.py.

◆ toDict()

lsst.ip.isr.defects.Defects.toDict ( self )

Return a dictionary containing the calibration properties.

The dictionary should be able to be round-tripped through
`fromDict`.

Returns
-------
dictionary : `dict`
    Dictionary of properties.

Reimplemented from lsst.ip.isr.calibType.IsrCalib.

Definition at line 398 of file defects.py.

◆ toFitsRegionTable()

lsst.ip.isr.defects.Defects.toFitsRegionTable ( self )

Convert defect list to `~lsst.afw.table.BaseCatalog` using the
FITS region standard.

Returns
-------
table : `lsst.afw.table.BaseCatalog`
    Defects in tabular form.

Notes
-----
The table created uses the
`FITS regions <https://fits.gsfc.nasa.gov/registry/region.html>`_
definition tabular format.  The ``X`` and ``Y`` coordinates are
converted to FITS Physical coordinates that have origin pixel (1, 1)
rather than the (0, 0) used in LSST software.

Definition at line 302 of file defects.py.

◆ toTable()

lsst.ip.isr.defects.Defects.toTable ( self )

Convert defects to a simple table form that we use to write
to text files.

Returns
-------
table : `lsst.afw.table.BaseCatalog`
    Defects in simple tabular form.

Notes
-----
These defect tables are used as the human readable definitions
of defects in calibration data definition repositories.  The format
is to use four columns defined as follows:

x0 : `int`
    X coordinate of bottom left corner of box.
y0 : `int`
    Y coordinate of bottom left corner of box.
width : `int`
    X extent of the box.
height : `int`
    Y extent of the box.

Reimplemented from lsst.ip.isr.calibType.IsrCalib.

Definition at line 436 of file defects.py.

◆ transpose()

lsst.ip.isr.defects.Defects.transpose ( self )

Make a transposed copy of this defect list.

Returns
-------
retDefectList : `Defects`
    Transposed list of defects.

Definition at line 244 of file defects.py.

◆ updateCounters()

lsst.ip.isr.defects.Defects.updateCounters	(	self,
		columns = None,
		hot = None,
		cold = None )

Update metadata with pixel and column counts.

Parameters
----------
columns : `int`, optional
    Number of full columns masked.
hot : `dict` [`str`, `int`], optional
    Dictionary with the count of hot pixels, indexed by amplifier name.
cold : `dict` [`str`, `int`], optional
    Dictionary with the count of hot pixels, indexed by amplifier name.

Definition at line 279 of file defects.py.

◆ updateMetadata()

lsst.ip.isr.calibType.IsrCalib.updateMetadata	(		self,
			camera = None,
			detector = None,
			filterName = None,
			setCalibId = False,
			setCalibInfo = False,
			setDate = False,
		**	kwargs )

inherited

Update metadata keywords with new values.

Parameters
----------
camera : `lsst.afw.cameraGeom.Camera`, optional
    Reference camera to use to set ``_instrument`` field.
detector : `lsst.afw.cameraGeom.Detector`, optional
    Reference detector to use to set ``_detector*`` fields.
filterName : `str`, optional
    Filter name to assign to this calibration.
setCalibId : `bool`, optional
    Construct the ``_calibId`` field from other fields.
setCalibInfo : `bool`, optional
    Set calibration parameters from metadata.
setDate : `bool`, optional
    Ensure the metadata ``CALIBDATE`` fields are set to the current
    datetime.
kwargs : `dict` or `collections.abc.Mapping`, optional
    Set of ``key=value`` pairs to assign to the metadata.

Reimplemented in lsst.ip.isr.brighterFatterKernel.BrighterFatterKernel, lsst.ip.isr.calibType.IsrProvenance, lsst.ip.isr.crosstalk.CrosstalkCalib, lsst.ip.isr.electrostaticBrighterFatter.ElectrostaticBrighterFatterDistortionMatrix, lsst.ip.isr.linearize.Linearizer, lsst.ip.isr.photodiodeCorrection.PhotodiodeCorrection, and lsst.ip.isr.ptcDataset.PhotonTransferCurveDataset.

Definition at line 208 of file calibType.py.

◆ updateMetadataFromExposures()

lsst.ip.isr.calibType.IsrCalib.updateMetadataFromExposures	(		self,
			exposures )

inherited

Extract and unify metadata information.

Parameters
----------
exposures : `list`
    Exposures or other calibrations to scan.

Definition at line 294 of file calibType.py.

◆ validate()

lsst.ip.isr.calibType.IsrCalib.validate	(		self,
			other = None )

inherited

Validate that this calibration is defined and can be used.

Parameters
----------
other : `object`, optional
    Thing to validate against.

Returns
-------
valid : `bool`
    Returns true if the calibration is valid and appropriate.

Reimplemented in lsst.ip.isr.linearize.Linearizer, and lsst.ip.isr.photodiodeCorrection.PhotodiodeCorrection.

Definition at line 691 of file calibType.py.

◆ writeFits()

lsst.ip.isr.calibType.IsrCalib.writeFits	(		self,
			filename )

inherited

Write calibration data to a FITS file.

Parameters
----------
filename : `str`
    Filename to write data to.

Returns
-------
used : `str`
    The name of the file used to write the data.

Reimplemented in lsst.ip.isr.transmissionCurve.IntermediateTransmissionCurve.

Definition at line 565 of file calibType.py.

◆ writeText()

lsst.ip.isr.calibType.IsrCalib.writeText	(	self,
		filename,
		format = "auto" )

inherited

Write the calibration data to a text file.

Parameters
----------
filename : `str`
    Name of the file to write.
format : `str`
    Format to write the file as.  Supported values are:
        ``"auto"`` : Determine filetype from filename.
        ``"yaml"`` : Write as yaml.
        ``"ecsv"`` : Write as ecsv.

Returns
-------
used : `str`
    The name of the file used to write the data.  This may
    differ from the input if the format is explicitly chosen.

Raises
------
RuntimeError
    Raised if filename does not end in a known extension, or
    if all information cannot be written.

Notes
-----
The file is written to YAML/ECSV format and will include any
associated metadata.

Definition at line 463 of file calibType.py.

Member Data Documentation

◆ _bulk_update

bool lsst.ip.isr.defects.Defects._bulk_update = True

protected

Definition at line 87 of file defects.py.

◆ _calibId

str lsst.ip.isr.calibType.IsrCalib._calibId = None

protectedinherited

Definition at line 76 of file calibType.py.

◆ _defects

lsst.ip.isr.defects.Defects._defects = []

protected

Definition at line 84 of file defects.py.

◆ _detectorId

lsst.ip.isr.calibType.IsrCalib._detectorId = None

protectedinherited

Definition at line 74 of file calibType.py.

◆ _detectorName

lsst.ip.isr.calibType.IsrCalib._detectorName = None

protectedinherited

Definition at line 72 of file calibType.py.

◆ _detectorSerial

lsst.ip.isr.calibType.IsrCalib._detectorSerial = None

protectedinherited

Definition at line 73 of file calibType.py.

◆ _filter

lsst.ip.isr.calibType.IsrCalib._filter = None

protectedinherited

Definition at line 75 of file calibType.py.

◆ _instrument

lsst.ip.isr.calibType.IsrCalib._instrument = None

protectedinherited

Definition at line 69 of file calibType.py.

◆ _metadata

lsst.ip.isr.calibType.IsrCalib._metadata = PropertyList()

protectedinherited

Definition at line 80 of file calibType.py.

◆ _OBSTYPE

str lsst.ip.isr.calibType.IsrCalib._OBSTYPE = "generic"

staticprotectedinherited

Definition at line 64 of file calibType.py.

◆ _raftName

lsst.ip.isr.calibType.IsrCalib._raftName = None

protectedinherited

Definition at line 70 of file calibType.py.

◆ _requiredAttributes

lsst.ip.isr.calibType.IsrCalib._requiredAttributes

protectedinherited

Definition at line 115 of file calibType.py.

◆ _SCHEMA

str lsst.ip.isr.calibType.IsrCalib._SCHEMA = "NO SCHEMA"

staticprotectedinherited

Definition at line 65 of file calibType.py.

◆ _seqcksum

lsst.ip.isr.calibType.IsrCalib._seqcksum = None

protectedinherited

Definition at line 79 of file calibType.py.

◆ _seqfile

lsst.ip.isr.calibType.IsrCalib._seqfile = None

protectedinherited

Definition at line 77 of file calibType.py.

◆ _seqname

lsst.ip.isr.calibType.IsrCalib._seqname = None

protectedinherited

Definition at line 78 of file calibType.py.

◆ _slotName

lsst.ip.isr.calibType.IsrCalib._slotName = None

protectedinherited

Definition at line 71 of file calibType.py.

◆ _VERSION

int lsst.ip.isr.calibType.IsrCalib._VERSION = 0

staticprotectedinherited

Definition at line 66 of file calibType.py.

◆ log

lsst.ip.isr.calibType.IsrCalib.log = log if log else logging.getLogger(__name__)

inherited

Definition at line 96 of file calibType.py.

◆ requiredAttributes

lsst.ip.isr.calibType.IsrCalib.requiredAttributes = set(["_OBSTYPE", "_SCHEMA", "_VERSION"])

inherited

Definition at line 90 of file calibType.py.

The documentation for this class was generated from the following file:

python/lsst/ip/isr/defects.py

Public Member Functions

Public Attributes

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Static Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ __init__()

Member Function Documentation

◆ __delitem__()

◆ __eq__()

◆ __getitem__()

◆ __iter__()

◆ __len__()

◆ __setitem__()

◆ __str__()

◆ _check_value()

◆ _get_values()

◆ _normalize()

◆ append()

◆ apply()

◆ bulk_update()

◆ calibInfoFromDict()

◆ copy()

◆ determineCalibClass()

◆ fromDetector()

◆ fromDict()

◆ fromFootprintList()

◆ fromMask()

◆ fromTable()

◆ getMetadata()

◆ insert()

◆ maskPixels()

◆ metadata()

◆ readFits()

◆ readLsstDefectsFile()

◆ readText()

◆ requiredAttributes() [1/2]

◆ requiredAttributes() [2/2]

◆ setMetadata()

◆ toDict()

◆ toFitsRegionTable()

◆ toTable()

◆ transpose()

◆ updateCounters()

◆ updateMetadata()

◆ updateMetadataFromExposures()

◆ validate()

◆ writeFits()

◆ writeText()

Member Data Documentation

◆ _bulk_update

◆ _calibId

◆ _defects

◆ _detectorId

◆ _detectorName

◆ _detectorSerial

◆ _filter

◆ _instrument

◆ _metadata

◆ _OBSTYPE

◆ _raftName

◆ _requiredAttributes

◆ _SCHEMA

◆ _seqcksum

◆ _seqfile

◆ _seqname

◆ _slotName

◆ _VERSION

◆ log

◆ requiredAttributes

◆ init()

◆ delitem()

◆ eq()

◆ getitem()

◆ iter()

◆ len()

◆ setitem()

◆ str()