lsst.ip.isr.isrTaskLSST.IsrTaskLSSTConfig Class Reference
Inheritance diagram for lsst.ip.isr.isrTaskLSST.IsrTaskLSSTConfig:
Public Member Functions | |
| validate (self) | |
| setDefaults (self) | |
Detailed Description
Configuration parameters for IsrTaskLSST. Items are grouped in the order in which they are executed by the task.
Definition at line 188 of file isrTaskLSST.py.
Member Function Documentation
◆ setDefaults()
| lsst.ip.isr.isrTaskLSST.IsrTaskLSSTConfig.setDefaults | ( | self | ) |
Definition at line 677 of file isrTaskLSST.py.
◆ validate()
| lsst.ip.isr.isrTaskLSST.IsrTaskLSSTConfig.validate | ( | self | ) |
Definition at line 656 of file isrTaskLSST.py.
Member Data Documentation
◆ ampNoiseThreshold
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
default=25.0,
doc="Maximum amplifier noise (e-) that is allowed before an amp is masked as bad. "
"Set to np.inf/np.nan to turn off noise checking.",
)
Definition at line 254 of file isrTaskLSST.py.
◆ ampOffset
|
static |
Initial value:
= pexConfig.ConfigurableField(
doc="Amp offset correction task.",
target=AmpOffsetTask,
)
Definition at line 524 of file isrTaskLSST.py.
◆ assembleCcd
|
static |
Initial value:
= pexConfig.ConfigurableField(
target=AssembleCcdTask,
doc="CCD assembly task.",
)
Definition at line 287 of file isrTaskLSST.py.
◆ badAmps
|
static |
Initial value:
= pexConfig.ListField(
dtype=str,
doc="List of bad amps that should be masked as BAD in the defect code. "
"Value should be of form {detector_name}_{amp_name}, e.g. ``R42_S21_C07``. "
"Only used if doDefect is True.",
default=[],
)
Definition at line 419 of file isrTaskLSST.py.
◆ bfKernel
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="bfk",
doc="Complete kernel + gain solutions.",
storageClass="BrighterFatterKernel",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 101 of file isrTaskLSST.py.
◆ bias
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="bias",
doc="Input bias calibration.",
storageClass="ExposureF",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 59 of file isrTaskLSST.py.
◆ binFactor1
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Binning factor for first binned exposure. This is intended for a finely binned output.",
default=8,
check=lambda x: x > 1,
)
Definition at line 643 of file isrTaskLSST.py.
◆ binFactor2
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Binning factor for second binned exposure. This is intended for a coarsely binned output.",
default=64,
check=lambda x: x > 1,
)
Definition at line 649 of file isrTaskLSST.py.
◆ binning
|
static |
Initial value:
= pexConfig.ConfigurableField(
target=BinImageDataTask,
doc="Task to bin the exposure.",
)
Definition at line 639 of file isrTaskLSST.py.
◆ brighterFatterFwhmForInterpolation
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
doc="FWHM of PSF in arcseconds used for interpolation in brighter-fatter correction "
"(currently unused).",
default=1.0,
)
Definition at line 575 of file isrTaskLSST.py.
◆ brighterFatterLevel
|
static |
Initial value:
= pexConfig.ChoiceField(
dtype=str,
doc="The level at which to correct for brighter-fatter.",
allowed={
"AMP": "Every amplifier treated separately.",
"DETECTOR": "One kernel per detector.",
},
default="DETECTOR",
)
Definition at line 542 of file isrTaskLSST.py.
◆ brighterFatterMaskGrowSize
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Number of pixels to grow the masks listed in config.brighterFatterMaskListToInterpolate "
"when brighter-fatter correction is applied.",
default=2,
)
Definition at line 569 of file isrTaskLSST.py.
◆ brighterFatterMaskListToInterpolate
|
static |
Initial value:
= pexConfig.ListField(
dtype=str,
doc="List of mask planes that should be interpolated over when applying the brighter-fatter "
"correction.",
default=["SAT", "BAD", "NO_DATA", "UNMASKEDNAN"],
)
Definition at line 563 of file isrTaskLSST.py.
◆ brighterFatterMaxIter
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Maximum number of iterations for the brighter-fatter correction.",
default=10,
)
Definition at line 551 of file isrTaskLSST.py.
◆ brighterFatterThreshold
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
doc="Threshold used to stop iterating the brighter-fatter correction. It is the "
"absolute value of the difference between the current corrected image and the one "
"from the previous iteration summed over all the pixels.",
default=1000,
)
Definition at line 556 of file isrTaskLSST.py.
◆ bssVoltageKeyword
|
static |
Initial value:
= pexConfig.Field(
dtype=str,
default="BSSVBS",
doc="Back-side bias voltage header keyword. Only checked if doCheckUnprocessableData is True "
"and bssVoltageMinimum is greater than 0.",
)
Definition at line 268 of file isrTaskLSST.py.
◆ bssVoltageMinimum
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
default=5.0,
doc="Minimum back-side bias voltage. Below this the detector is ``off`` and an "
"UnprocessableDataError will be logged. Check will be skipped if doCheckUnprocessableData "
"is False or if value is less than or equal to 0.",
)
Definition at line 261 of file isrTaskLSST.py.
◆ camera
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="camera",
storageClass="Camera",
doc="Input camera to construct complete exposures.",
dimensions=["instrument"],
isCalibration=True,
)
Definition at line 44 of file isrTaskLSST.py.
◆ cameraKeywordsToCompare
|
static |
Initial value:
= pexConfig.ListField(
dtype=str,
doc="List of header keywords to compare between exposure and calibrations.",
default=[],
)
Definition at line 215 of file isrTaskLSST.py.
◆ ccdExposure
|
staticinherited |
Initial value:
= cT.Input(
name="raw",
doc="Input exposure to process.",
storageClass="Exposure",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 38 of file isrTaskLSST.py.
◆ crosstalk
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="crosstalk",
doc="Input crosstalk object",
storageClass="CrosstalkCalib",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 87 of file isrTaskLSST.py.
◆ dark
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name='dark',
doc="Input dark calibration.",
storageClass="ExposureF",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 108 of file isrTaskLSST.py.
◆ defaultSaturationSource
|
static |
Initial value:
= pexConfig.ChoiceField(
dtype=str,
doc="Source to retrieve default amp-level saturation values.",
allowed={
"NONE": "No default saturation values; only config overrides will be used.",
"CAMERAMODEL": "Use the default from the camera model (old defaults).",
"PTCTURNOFF": "Use the ptcTurnoff value as the saturation level.",
},
default="PTCTURNOFF",
)
Definition at line 360 of file isrTaskLSST.py.
◆ defaultSuspectSource
|
static |
Initial value:
= pexConfig.ChoiceField(
dtype=str,
doc="Source to retrieve default amp-level suspect values.",
allowed={
"NONE": "No default suspect values; only config overrides will be used.",
"CAMERAMODEL": "Use the default from the camera model (old defaults).",
"PTCTURNOFF": "Use the ptcTurnoff value as the suspect level.",
},
default="PTCTURNOFF",
)
Definition at line 380 of file isrTaskLSST.py.
◆ defects
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name='defects',
doc="Input defect tables.",
storageClass="Defects",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 94 of file isrTaskLSST.py.
◆ deferredChargeCalib
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="cti",
doc="Deferred charge/CTI correction dataset.",
storageClass="IsrCalib",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 66 of file isrTaskLSST.py.
◆ deferredChargeCorrection
|
static |
Initial value:
= pexConfig.ConfigurableField(
target=DeferredChargeTask,
doc="Deferred charge correction task.",
)
Definition at line 305 of file isrTaskLSST.py.
◆ dnlLUT
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="dnlLUT",
doc="Look-up table for differential non-linearity.",
storageClass="IsrCalib",
dimensions=["instrument", "exposure", "detector"],
isCalibration=True,
# TODO DM 36636
)
Definition at line 51 of file isrTaskLSST.py.
◆ doAmpOffset
|
static |
Initial value:
= pexConfig.Field(
doc="Calculate amp offset corrections?",
dtype=bool,
default=False,
)
Definition at line 519 of file isrTaskLSST.py.
◆ doApplyGains
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply gains to the image?",
default=True,
)
Definition at line 323 of file isrTaskLSST.py.
◆ doAssembleCcd
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=True,
doc="Assemble amp-level exposures into a ccd-level exposure?"
)
Definition at line 282 of file isrTaskLSST.py.
◆ doBias
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply bias frame correction?",
default=True,
)
Definition at line 293 of file isrTaskLSST.py.
◆ doBinnedExposures
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Should binned exposures be calculated?",
default=False,
)
Definition at line 634 of file isrTaskLSST.py.
◆ doBootstrap
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=False,
doc="Is this task to be run in a ``bootstrap`` fashion that does not require "
"a PTC or full calibrations?",
)
Definition at line 228 of file isrTaskLSST.py.
◆ doBrighterFatter
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply the brighter-fatter correction?",
default=True,
)
Definition at line 537 of file isrTaskLSST.py.
◆ doCalculateStatistics
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Should additional ISR statistics be calculated?",
default=True,
)
Definition at line 623 of file isrTaskLSST.py.
◆ doCheckUnprocessableData
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=True,
doc="Check if this image is completely unprocessable due to all bad amps.",
)
Definition at line 235 of file isrTaskLSST.py.
◆ doCorrectGains
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply temperature correction to the gains?",
default=False,
)
Definition at line 318 of file isrTaskLSST.py.
◆ doCrosstalk
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply intra-CCD crosstalk correction?",
default=True,
)
Definition at line 392 of file isrTaskLSST.py.
◆ doDark
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply dark frame correction.",
default=True,
)
Definition at line 588 of file isrTaskLSST.py.
◆ doDefect
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply correction for CCD defects, e.g. hot pixels?",
default=True,
)
Definition at line 414 of file isrTaskLSST.py.
◆ doDeferredCharge
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply deferred charge correction?",
default=True,
)
Definition at line 300 of file isrTaskLSST.py.
◆ doDiffNonLinearCorrection
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Do differential non-linearity correction?",
default=False,
)
Definition at line 222 of file isrTaskLSST.py.
◆ doE2VEdgeBleedMask
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask flag-like edge bleeds from saturated columns "
"in E2V amplifiers.",
default=True,
)
Definition at line 441 of file isrTaskLSST.py.
◆ doFlat
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply flat field correction.",
default=True,
)
Definition at line 595 of file isrTaskLSST.py.
◆ doHeaderProvenance
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=True,
doc="Write calibration identifiers into output exposure header.",
)
Definition at line 203 of file isrTaskLSST.py.
◆ doInterpolate
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Interpolate masked pixels?",
default=True,
)
Definition at line 497 of file isrTaskLSST.py.
◆ doITLDipMask
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Apply ``ITL dip`` masking. The ``itlDipMaskPlane`` mask plane "
"will be added even if this configuration is False.",
default=True,
)
Definition at line 403 of file isrTaskLSST.py.
◆ doITLEdgeBleedMask
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask edge bleeds from saturated columns in ITL amplifiers.",
default=True,
)
Definition at line 465 of file isrTaskLSST.py.
◆ doITLSatSagMask
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask columns presenting saturation sag.",
default=True,
)
Definition at line 470 of file isrTaskLSST.py.
◆ doLinearize
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Correct for nonlinearity of the detector's response?",
default=True,
)
Definition at line 311 of file isrTaskLSST.py.
◆ doNanMasking
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask non-finite (NAN, inf) pixels. The UNMASKEDNAN mask plane "
"will be added even if this configuration is False.",
default=True,
)
Definition at line 426 of file isrTaskLSST.py.
◆ doRaiseOnCalibMismatch
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=False,
doc="Should IsrTaskLSST halt if exposure and calibration header values do not match?",
)
Definition at line 210 of file isrTaskLSST.py.
◆ doSaturation
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask saturated pixels? NB: this is totally independent of the"
" interpolation option - this is ONLY setting the bits in the mask."
" To have them interpolated make sure doInterpolate=True and"
" maskListToInterpolate includes SAT.",
default=True,
)
Definition at line 347 of file isrTaskLSST.py.
◆ doSaveInterpPixels
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Save a copy of the pre-interpolated pixel values?",
default=False,
)
Definition at line 507 of file isrTaskLSST.py.
◆ doSetBadRegions
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Should we set the level of all BAD patches of the chip to the chip's average value?",
default=True,
)
Definition at line 530 of file isrTaskLSST.py.
◆ doStandardStatistics
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Should standard image quality statistics be calculated?",
default=True,
)
Definition at line 617 of file isrTaskLSST.py.
◆ doSuspect
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask suspect pixels?",
default=True,
)
Definition at line 370 of file isrTaskLSST.py.
◆ doVariance
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Calculate variance?",
default=True
)
Definition at line 330 of file isrTaskLSST.py.
◆ doWidenSaturationTrails
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Widen bleed trails based on their width.",
default=False,
)
Definition at line 432 of file isrTaskLSST.py.
◆ e2vEdgeBleedSatMaxArea
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Maximum limit of saturated cores footprint area to apply edge"
"bleed masking in E2V amplifiers.",
default=100000,
)
Definition at line 453 of file isrTaskLSST.py.
◆ e2vEdgeBleedSatMinArea
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Minimum limit of saturated cores footprint area to apply edge"
"bleed masking in E2V amplifiers.",
default=10000,
)
Definition at line 447 of file isrTaskLSST.py.
◆ e2vEdgeBleedYMax
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Height in pixels of edge bleed masking in E2V amplifiers (width"
"is the width of the amplifier).",
default=350,
)
Definition at line 459 of file isrTaskLSST.py.
◆ expectWcs
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
default=True,
doc="Expect input science images to have a WCS (set False for e.g. spectrographs)."
)
Definition at line 194 of file isrTaskLSST.py.
◆ flat
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="flat",
doc="Input flat calibration.",
storageClass="ExposureF",
dimensions=["instrument", "detector", "physical_filter"],
isCalibration=True,
)
Definition at line 115 of file isrTaskLSST.py.
◆ flatScalingType
|
static |
Initial value:
= pexConfig.ChoiceField(
dtype=str,
doc="The method for scaling the flat on the fly.",
default='USER',
allowed={
"USER": "Scale by flatUserScale",
"MEAN": "Scale by the inverse of the mean",
"MEDIAN": "Scale by the inverse of the median",
},
)
Definition at line 600 of file isrTaskLSST.py.
◆ flatUserScale
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
doc="If flatScalingType is 'USER' then scale flat by this amount; ignored otherwise.",
default=1.0,
)
Definition at line 610 of file isrTaskLSST.py.
◆ growSaturationFootprintSize
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Number of pixels by which to grow the saturation footprints.",
default=1,
)
Definition at line 581 of file isrTaskLSST.py.
◆ hvBiasKeyword
|
static |
Initial value:
= pexConfig.Field(
dtype=str,
default="HVBIAS",
doc="Back-side bias voltage on/off header keyword. Only checked if doCheckUnprocessableData is True "
"and bssVoltageMinimum is greater than 0.",
)
Definition at line 274 of file isrTaskLSST.py.
◆ isrStats
|
static |
Initial value:
= pexConfig.ConfigurableField(
target=IsrStatisticsTask,
doc="Task to calculate additional statistics.",
)
Definition at line 628 of file isrTaskLSST.py.
◆ itlDipMaskPlanes
|
static |
Initial value:
= pexConfig.ListField(
dtype=str,
doc="Mask plane to use for ITL dip pixels.",
default=["SUSPECT", "ITL_DIP"],
)
Definition at line 409 of file isrTaskLSST.py.
◆ itlEdgeBleedModelConstant
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
doc="Constant in the edge bleed exponential decay model.",
default=0.02,
)
Definition at line 490 of file isrTaskLSST.py.
◆ itlEdgeBleedSatMaxArea
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Maximum limit for saturated cores footprint area.",
default=100000,
)
Definition at line 480 of file isrTaskLSST.py.
◆ itlEdgeBleedSatMinArea
|
static |
Initial value:
= pexConfig.Field(
dtype=int,
doc="Minimum limit for saturated cores footprint area.",
default=10000,
)
Definition at line 475 of file isrTaskLSST.py.
◆ itlEdgeBleedThreshold
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
doc="Sky background threshold for edge bleed detection.",
default=5000.,
)
Definition at line 485 of file isrTaskLSST.py.
◆ linearizer
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name='linearizer',
storageClass="Linearizer",
doc="Linearity correction calibration.",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 73 of file isrTaskLSST.py.
◆ masking
|
static |
Initial value:
= pexConfig.ConfigurableField(
target=MaskingTask,
doc="Masking task."
)
Definition at line 437 of file isrTaskLSST.py.
◆ maskListToInterpolate
|
static |
Initial value:
= pexConfig.ListField(
dtype=str,
doc="List of mask planes that should be interpolated.",
default=["SAT", "BAD", "UNMASKEDNAN"],
)
Definition at line 502 of file isrTaskLSST.py.
◆ maskNegativeVariance
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Mask pixels that claim a negative variance. This likely indicates a failure "
"in the measurement of the overscan at an edge due to the data falling off faster "
"than the overscan model can account for it.",
default=True,
)
Definition at line 335 of file isrTaskLSST.py.
◆ negativeVarianceMaskName
|
static |
Initial value:
= pexConfig.Field(
dtype=str,
doc="Mask plane to use to mark pixels with negative variance, if `maskNegativeVariance` is True.",
default="BAD",
)
Definition at line 342 of file isrTaskLSST.py.
◆ outputBin1Exposure
|
staticinherited |
Initial value:
= cT.Output(
name="postIsrBin1",
doc="First binned image.",
storageClass="ExposureF",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 134 of file isrTaskLSST.py.
◆ outputBin2Exposure
|
staticinherited |
Initial value:
= cT.Output(
name="postIsrBin2",
doc="Second binned image.",
storageClass="ExposureF",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 140 of file isrTaskLSST.py.
◆ outputExposure
|
staticinherited |
Initial value:
= cT.Output(
name='postISRCCD',
doc="Output ISR processed exposure.",
storageClass="Exposure",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 122 of file isrTaskLSST.py.
◆ outputStatistics
|
staticinherited |
Initial value:
= cT.Output(
name="isrStatistics",
doc="Output of additional statistics table.",
storageClass="StructuredDataDict",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 147 of file isrTaskLSST.py.
◆ overscanCamera
|
static |
Initial value:
= pexConfig.ConfigField(
dtype=OverscanCameraConfig,
doc="Per-detector and per-amplifier overscan configurations.",
)
Definition at line 241 of file isrTaskLSST.py.
◆ preInterpExposure
|
staticinherited |
Initial value:
= cT.Output(
name='preInterpISRCCD',
doc="Output ISR processed exposure, with pixels left uninterpolated.",
storageClass="ExposureF",
dimensions=["instrument", "exposure", "detector"],
)
Definition at line 128 of file isrTaskLSST.py.
◆ ptc
|
staticinherited |
Initial value:
= cT.PrerequisiteInput(
name="ptc",
doc="Input Photon Transfer Curve dataset",
storageClass="PhotonTransferCurveDataset",
dimensions=["instrument", "detector"],
isCalibration=True,
)
Definition at line 80 of file isrTaskLSST.py.
◆ qa
|
static |
Initial value:
= pexConfig.ConfigField(
dtype=isrQa.IsrQaConfig,
doc="QA related configuration options.",
)
Definition at line 199 of file isrTaskLSST.py.
◆ saturatedMaskName
|
static |
Initial value:
= pexConfig.Field(
dtype=str,
doc="Name of mask plane to use in saturation detection and interpolation.",
default="SAT",
)
Definition at line 355 of file isrTaskLSST.py.
◆ serialOverscanMedianShiftSigmaThreshold
|
static |
Initial value:
= pexConfig.Field(
dtype=float,
default=numpy.inf,
doc="Number of sigma difference from per-amp overscan median (as compared to PTC) to "
"check if an amp is in a different state than the baseline PTC calib and should "
"be marked BAD. Set to np.inf/np.nan to turn off overscan median checking.",
)
Definition at line 246 of file isrTaskLSST.py.
◆ suspectMaskName
|
static |
Initial value:
= pexConfig.Field(
dtype=str,
doc="Name of mask plane to use for suspect pixels.",
default="SUSPECT",
)
Definition at line 375 of file isrTaskLSST.py.
◆ useLegacyInterp
|
static |
Initial value:
= pexConfig.Field(
dtype=bool,
doc="Use the legacy interpolation algorithm. If False use Gaussian Process.",
default=True,
)
Definition at line 512 of file isrTaskLSST.py.
The documentation for this class was generated from the following file:
- python/lsst/ip/isr/isrTaskLSST.py
Generated on Thu Oct 9 2025 03:58:45 for lsst.ip.isr by
1.13.2